Product ID:M1664 RADIO FREQUENCY FILTER
MSDS Date:12/06/1995
FSC:5915
NIIN:00-763-9064
Status Code:A
MSDS Number: CHVVM

Emergency Phone: 516-567-4666/FAX 516-567-4654

Info Phone: 516-567-4666/FAX 516-567-4654

Cage: 59901

Cage: NO763

POLYETHYLENE WAX,(MFR STATES,NO HAZARDOUS INGREDIENTS AS

CAS: 9002-88-4

RTECS: KX3270000

LD50 LC50 Mixture:NOT AVALIABLE
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PRODUCT IN HERMETICALLY SEALED FILTER
NOT A HEALTH HAZARD. CONTACT WITH HOT MOLTEN MATERIAL USED FOR
APPLICATION PURPOSES MAY CAUSE THERMAL BURNS TO SKIN AND EYES.
BREATHING FUMES IN CONFINED AREAS CA N CAUSE RESPIRATORY DISCOMFORT
AND IRRITATION.THE INGREDIENT IS ESSENTIALLY INERT AND NON-TOXIC IN
RESPECT TO INGESTION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:BASED ON FREE INGREDIENT: THERMAL BURNS TO SKIN
AND EYES. RESPIRATORY IRRITATION.
Medical Cond Aggravated by Exposure:NOT A PROBLEM IN HERMETICALLY
SEALED FILTER.

First Aid:NOT A PROBLEM IN HERMETICALLY SEALED FILTER. BASED ON MOLTEN
MATERIAL FOR APPLICATION PURPOSES: EYES: FLUSH EYES WITH LARGE
AMOUNTS OF WATER.GET MEDICAL ATTENTION. SKIN: CONTACT INJURED AREA
WITH RUNN ING WATER. DO NOT ATTEMPT TO REMOVE MATERIAL BONDED TO
SKIN. GET MEDICAL ATTENTION. INHALATION:MOVE TO FRESH AIR.GET
MEDICAL ATTENTION IF NEEDED.INGESTION:DO NOT INDUCE VOMITING.GET
MEDICAL ATTENTION.

Flash Point Method:COC
Flash Point:450F,232C,INGRED
Extinguishing Media:FOR FREE INGREDIENT:USE WATER FOG,FOAM,DRY
CHEMICAL,CARBON DIOXIDE FOR FIRE FIGHTING. DO NOT USE DIRECT STREAM
OF WATER.
Fire Fighting Procedures:PROTECTIVE FIRE FIGHTING CLOTHING SHOULD BE
WORN WHEN FIGHTING HYDROCARBON FIRE.FUMES SHOULD BE AVOIDED AND
SELF CONTAINED BREATHING APPARATUS SHOULD BE WORN.
Unusual Fire/Explosion Hazard:FOR FREE INGREDIENT: SENSITIVITY TO
IMPACT: N/A. RATE OF BURNING: N/A. EXPLOSIVE POWER: N/A.
SENSITIVITY TO STATIC DISCHARGE: N/A.

Spill Release Procedures:BASED ON FREE INGREDIENT: HANDLE AS A
THERMOPLASTIC.WITH MOLTEN SPILLS,ALLOW MATERIAL TO SOLIDIFY AND
COOL.KEEP MATERIAL OUT OF SEWERS AND WATERCOURSES BY DIKING OR
IMPOUNDING.RECOVER AND PLACE INTO A PPROPRIATE CONTAINERS FOR
RECYCLING OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:HERMETICALLY SEALED FILTERS: PROTECT
FROM PHYSICAL DAMAGE. FREE MOLTEN INGREDIENT: USE INERT GAS
BLANKETING TO AVOID DEGRADATION.
Other Precautions:FOR FREE SOLID INGREDIENT: KEEP IN CLOSED CONTAINERS
TO AVOID CONTAMINATION.

Respiratory Protection:FOR HERMETICALLY SEALED FILTER: NONE SHOULD BE
NEEDED. FOR FREE MOLTEN PRODUCT: USE IN WELL VENTILATED AREAS. WHEN
IN CONFINED AREAS, USE APPROPRIATE RESPIRATORY GEAR.
Ventilation:NONE REQUIRED FOR HERMETICALLY SEALED FILTER. USE THE FREE
MOLTEN MATERIAL IN WELL VENTILATED AREAS.
Protective Gloves:WEAR THERMAL GLOVES FOR MOLTEN MATERIAL.
Eye Protection:MOLTEN MATERIAL:EYE SHIELDS MUST BE WORN
Other Protective Equipment:WEAR PROTECTIVE CLOTHING WHEN HANDLING
MOLTEN MATERIAL.
Work Hygienic Practices:NORMAL PERSONAL HYGENIC PRACTICES ARE ADEQUATE.
Supplemental Safety and Health
THIS MSDS IS BASED ON MFR'S MSDS FOR POTTING MATERIAL UTILIZED IN
FILTER M1664,SENT WITH FOLLOWING COVER LETTER,DATED 10/2/98,TO DICK
TRAYLOR: "MSG: MR. TRAYLOR, IN RESPONSE TO YOUR REQUEST I HAVE ATT
ACHED THE MATERIAL SAFETY DATA SHEET FOR THE POTTING MATERIAL
UTILIZED IN M1664".FROM DAVE RADFORD,MTK ELECTRONICS, INC.

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:219F,104C
Vapor Pres:<0.01MM HG
Vapor Density:>5 AIR =1
Spec Gravity:0.94
Evaporation Rate & Reference:<0.01 (BUTYL ACETATE = 1)
Solubility in Water:<0.1
Appearance and Odor:HERMETICALLY SEALED, METAL BODY RADIO FREQUENCY
FILTER CONTAINING A WHITE SOLID
Percent Volatiles by Volume:<0.01

Stability Indicator/Materials to Avoid:YES
AVOID INGREDIENT CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:INGREDIENT STABLE AT NORMAL AMBIENT AND
ANTICIPATED STORAGE CONDITIONS.
Hazardous Decomposition Products:FREE INGREDIENT: SEVERE HEATING CAN
PRODUCE CARBON MONOXIDE, CARBON DIOXIDE, HYDROCARBON VAPORS,
OXYGENATED CHEMICALS.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.